Its rollin, rollin rollin

Well Went in Today, and its a Rolling shell..

Have plenty of pics to upload,

Basically Everything is done, Except for the little minor Mods

- Windscreen (I have no goggles)
- E Boost
- Turbo Timer
- Guages
- Susp Kit
- HID
- Tint
- Alarm

Then to Add

Tune, Buff and Registration.

Hoping to get over pits this Week, and as Im off to NZ for 2 weeks, When i get back should have a big update for you.

33 GTST Brakes and 5 stud Conversion, Front and Rear





Now to get it registered, I needed to plumb it back into the zaust, so this was made up by Roy, a plumb back into the zaust behind the cat, so it wouldnt affect power, Tho its ready to be taken off and screamer straight to the floor :P



And some of the Latest Pics, With some of Jeffs 20" Gold GT-C 9.5/10.5 Wide Rims, which are for his v35, Tho they do look nice






Now its Rolling, some quick happy snaps with some Stockies - Tho 34 GTR, But now My rims have arrived, Time to fit them just in time.





Until next Time.

hehehe :P

Ready For Take Off!!!

Well Intake sensor, belts and Ext Wastegate are on, and battery is being charged.

Then some final checks and will be ready to start up.

Im feeling nice, so heres a picture of my engine bay, tho this may change :P

Time gets closer

Well another short update - but will give you a picture of the car this time.

A Few things has happened since last update,

1. Intercooler piping and intake piping fitted up and installed
2. New battery arrived - as other one was dead
3. Radiator overflow bottle arrived and installed
4. Radiator has been properly mounted now
5. Heatsheild installed
6. Rocker Cover arrived and installed with polished bolts and weld coil pack cover
7. 5 Stud hubs installed in front
8. Calipers Painted
9. Recieved Base map for the car to be started, From the guys down at Guru in Bunbury

well to get it running, all they need is
- belts on (Cos of pulley kit diff sizes)
- gate on, and
- intake sensors hooked up

so could be today or tomorrow..

Then gets run in for 50-100kms then gets tuned

then....

for compliance it needs
- Side intrusion bars
- seatbelts

for licencing it needs
- alarm/immobiliser

then when done parts to be installed when back at shop
- guages
- diff
- sway bars and bushes
- exhaust
- tint
- Digital climate control
- Pineappled
- HID lights
- Few other suprises

then goes off to panel beaters for final compound

There are a few other things to be done and Not sure if it will be in order, but is just a brief outline of what approximatley needs to be done :)

See picture below

bla bla bla

Well....

Rocker Cover has arrived.

Battery Installed.

Single 044 fuel pump installed for pits, then will be changed to 023 in tank and the 044 external fuel pump with surge tank.

Just need to have intercooler piping made up and installed then can have it running.

Comply it - Seatbelts, Side instrusion bars and then can be taken over pits and regoed.

Then down to big bad george for a tune.

and lastly all cosmetics for all your ricers :)

Ahhh its near.

Ps, Will be at CABIN autosalon this year July 29-30.

pps, If you wondering why no pics, its because Im not supplying any till its completion.

Peace out, A town!